PPR 6 Inch Equal Tee Fitting

A six-inch tee on a pressurized hot water riser is not a fitting you gamble with. A single cold weld there can shut down a hospital wing. Foshan Xinlisu Plastic Technology Co., Ltd. builds the PPR 6 Inch Equal Tee Fitting to take that risk off the table. Molded from virgin polypropylene random copolymer, this Large Diameter Ppr Equal Tee gives you a uniform 160 mm branch with a full PN16 pressure class—enough to run continuous 16-bar cold water or 9.6-bar at 90°C. The Pn16 Ppr Equal Tee Hot/cold body uses a deep socket design on all three ports, with a 62 mm insertion stop that locks the fusion joint straight and centered. Unlike some tees that warp slightly out of plane during cooling, ours holds a true 90-degree split because the mold cores are cooled independently. That precision makes the 6 Inch Ppr Equal Tee Main Line a direct bolt-on for district heating risers, cooling towers, and pumped return headers. In the larger family of Pipe fittings, this one commands the trunk…

PPR Female Tee PPR Socket PPR Tee PPR accessories Reel Pipe