Plug Pins Insulation Sheath Sleeve Abrasion Resistance Durability Tester Equipment

                 Plug Pins Insulation Sheath Abrasion Resistance Tester            YW-1124 Standards: Clause 24.7 and Figure 28 of GB2099.1-2008, Figure 28 of IEC 60884-1 and Figure 9 of BS1363 Application: Testing the abrasion resistance of the pin insulation sleeve of plugs Test on: Plug and pin insulation sleeve Component: A horizontal beam and a linear-motion clamp holder Functionality : At the end of the horizontal beam, there is a short steel wire bent into a U-shape with a diameter of 1mm (the two points of the U-shape are fixed vertically onto the beam), and the bottom straight edge of the steel wire U-shape measures 6mm, serving as the working section. The straight bottom edge of the U-shaped steel wire is pressed against the insulation sleeve of the pin, and an electric motor drives the clamp holder equipped…

Flammability Testing Instrument Power Line And Cable Testing Instrument Household Appliances Safety Test Friction Scratch Testing Instruments Plug,Pins,Socket,Outlet,Switch Test Instrument