Intermix(Premix) Glass Beads for Road Marking Paint

Intermix(Premix) Glass Beads  for Road Marking  During the production of highway painting, put glass bead into paint based on the ratio of 18-25% (weight percentage), so that the highway paint can still keep reflectivity during wear and friction. The ratio is refer to the specification of Communication Industry Standard of the People`s Republic of China No. JT/T280-2004, the standards which is different in different countries and areas. According to the specification of Communication Industry Standard of The People's Republic of China No.GB/T24722-2009, the granulometry is shown in the table below: Ratio:2.4-2.6g/cm3 Reflectivity:≥1.50 Roundness:≥80% Contained ratio of magnetic particlea:≤0.1% The appearance of glass bead should be colorless, loosen and spherical particle, should be clean without impurity, and without agglomeration The glass bead can be produced based on the standard of countries or areas, such as EN1423/1424, AASHTO M247, BS6088, J…

Similar

High Hardness Grinding Glass Beads
Cold/Thermoplastic Paint Premix BS6088A Glass Beads
Sand Blasting Glass Beads For Sandblasting Machine
High Strength Glass Beads for Shot Blasting
Roadmarking Glass Beads for Traffic Sign
Reflective Glass Beads Embededded in Acrylic Paint
Size Range 0.85-1.4mm Big Glass Beads
High Retro-reflection Dual-Coated Beads for Roadmarking
S-Brilliance Glass Beads for Pavement Markings Paint
AASHTO M247 Standards Dual-Coated Glass Beads
High Quality Reflective Glass Beads for Roadmarking
BS6088A/B  High Reflective Beads for RoadMarking

CHIYE GLASS BEAD (HEBEI) CO., LTD

CHIYE GLASS BEAD (HEBEI) CO., LTD. Which was set up in 1998,is the biggest and specialized suppl…

Copyrights © 2024 astszcmparts.com All Rights.Reserved .