Hydrogen generation reformer for Liaoning Panjin Petrochemical Ethylene plant 50km3/h TOPICN13003 Fired Heater The hydrocarbon steam reforming process is the principal industrial process used to manufacture synthesis gas for the production of ammonia, hydrogen and methanol.Steam Superheater The heart of this process is the tubular primary reformer where the hydrocarbon feed plus steam is catalytically reacted to produce the synthesis gas. The standard primary reformer system is the tubular reformer where the feed stream passes over the catalyst packed in multiple banks of externally heated tubes. The tubes are heated in a refractory lined firebox which may be top, side, or bottom fired. The feed flow can be downflow or up-flow through the tubes. With improvements in tube metallurgy, primary reformers operate at pressure up to 60 bar and tube wall temperatures up to 1000° C. The average heat flux may be as high as 30, 000 Btu/hr. Ft2. The feedstock may vary as natural…

Similar

High Pressure Reaction Cylinder and Mixing Vessel
high quality Tube bundle for DRI
Convection section for steam superheating furnace
Convection section for reaction feeding fired heater
high quality Reformer tube for DRI
Convection section for hydrogen generation reformer
Furnace roller for CAL and CGL Line
high quality W type radiant tube
Centrifugal Casting Cracking furnace tube
Hydrogen generation Steam reformer tube
Centrifugal Casting Cracking Tubes
Fired heater for 130KTA CCRU

Tuopu Industry(Jiangsu) Co., Ltd.

TOPICN was established in 1998, governs two full-owned subsidiaries, two domestic offices…

Copyrights © 2024 astszcmparts.com All Rights.Reserved .