High quality fully transparent ABS

Taiwan Qimei PA-758 is suitable for making general mechanical parts, wear-resistant parts, transmission parts, and telecommunications parts Forming characteristics: 1. Amorphous material, with moderate fluidity and high moisture absorption, must be fully dried. Plastic parts that require gloss on the surface must be preheated and dried for a long time at 80-90 degrees Celsius for 3 hours. 2. High material temperature and high mold temperature are recommended, but they are prone to decomposition (decomposition temperature>270 degrees Celsius). For high-precision plastic parts, the mold temperature should be set at 50-60 degrees Celsius, and for high gloss and heat-resistant plastic parts, the mold temperature should be set at 60-80 degrees Celsius. 3. To solve the problem of water marks, it is necessary to improve the material's fluidity by adopting high material temperature and high mold temperature, Alternatively, methods such as changing the inlet water level can be employed. 4. I…

General Grade Polystyrene AS Resin PC Or ABS Polycarbonate Abs Plastic