professional no-clean solder wire with good quality

A general purpose flux cored solder for use on most metals including steels, tinned sheets, galvanised, copper and brass. Solder procedure:  1. Thoroughly clean all areas to be joined, remove dirt and grease to ensure a perfect joint. 2. In the case of lap joints, allow 5 thou (0.1mm) gap between faces to allow metal to flow between joints. 3. Heat the job(do not overheat) and touch the wire to the job, following through with iron or torch, the alloy will begin to flow when the correct temperature is reached. 4. Keep melting the alloy off and allow it to flow into the joint until the joint is completed. 5. Remove any flux residue with water. 6. Grind or polish as required where a neat finish is needed. Leaded solder wire Sn60Pb40,melting temperature 190℃，quick soldering for electronic components, diameter 0.8mm, with rosin cored flux. hand soldering and machine soldering both available. 1kg each spool, packed in 20KGS or 24KGS cartons, spool siz…

Tin Lead Copper Soldering Bar Tin Copper Solder Wire Acid Soldering Flux Paste Water-soluble Soldering Flux Paste Tin Lead Cadmium Soldering Bar