Centrifugal casting cracking tube TOPICN13026 Ethylene cracking furnace mainly includes heating system, heat recovery system, reaction system. Tubular cracking furnace is the main way to produce ethylene in China. The cracking furnace tube is used in the radiation section, it is also called the radiant section furnace tube. The centrifugal casting cracking tube, characteristic of heat resistance and wear resistance. Manufacturing process: centrifugal casting Material: ZG40Cr25Ni35Nb, ZG40Cr35Ni45Nb, HP-Nb, HT50,GX40NiCrSiNb35-26,GX40NiCrNb45-35, G-NiCr28W and SCH24XNb etc. Specification: Furnace tube: O.D.:50MM-200MM, wall thickness: 5mm-20mm; Manifold: O.D.:100mm-400mm, wall thickness:10mm-40mm; Centrifugal casting bent tube: to drawings. Static casting:90°elbow, 180°elbow, Tee, hand type tube, special-shaped three-dimensional elbow, hanger etc.. Manufacturing standards: 1. The design requirements of the customer and en…

Similar

High Pressure Reaction Cylinder and Mixing Vessel
high quality Tube bundle for DRI
Convection section for steam superheating furnace
Convection section for reaction feeding fired heater
high quality Reformer tube for DRI
Convection section for hydrogen generation reformer
Furnace roller for CAL and CGL Line
high quality W type radiant tube
Hydrogen generation Steam reformer tube
Centrifugal Casting Cracking Tubes
Fired heater for 130KTA CCRU
Fired heaters for CDU & VDU

Tuopu Industry(Jiangsu) Co., Ltd.

TOPICN was established in 1998, governs two full-owned subsidiaries, two domestic offices…

Copyrights © 2024 astszcmparts.com All Rights.Reserved .